swimb8s Posted January 21, 2019 Report Share Posted January 21, 2019 I seem to be the master of not being able to make UV resins cure, Bondic was OK ,the Loon Thin and Loon Thick is the one I'm using now . First time trying I found my batteries were weak in torch , second attempt everything cured perfectly ( 4 A.M. ) , later that day using the same things the same way and even changing batteries I can't get either one in small or large doses to cure . Only thing I can think of is a small amount of sunlight shining in caused the torch not to be as bright , Even took outside to cure in sun nothing cured . I believe that 30 seconds of UV blast is more than enough time and the torch is a Clear Cure Goo lamp . Thanks for the help, I'm going crazy here !! Tommy Quote Link to comment Share on other sites More sharing options...
swimb8s Posted March 8, 2019 Author Report Share Posted March 8, 2019 Purchased a loon UV light and so far has cured all UV resins . Could be a UV wavelength problem or I'm a big dummy Quote Link to comment Share on other sites More sharing options...
