badhatharry Posted January 27, 2019 Report Share Posted January 27, 2019 I got to thinking about some comments to one of my previous posts stating that using a fluid bed for spinner/buzz baits is difficult because the wire and hook prevent the traditional dip method. Well I set out to build a better mouse trap and came up with a method that works for me. Forgive me if this is old news and you all have thought of this already. I built a new fluid bed using 1 1/2" PVC instead of 2". I used a dremel to cut two opposing slots about 1" down from the top of the cup and then wrapped the upper cup with 3-4 turns of electric tape. I then used a utility knife to slice down the slots. I load the powder as usual, turn on the pump, and lining up the wire and hook with the slots, lower the spinner/buzz into the powder and everything else is like you would normally do. I really am enjoying this new part of bass fishing I discovered and I can do it all winter long! I really appreciate the collective knowledge that is found here. I'm thinking this is pretty self-explanatory but if needed I will try to post a pic. 1 Quote Link to comment Share on other sites More sharing options...
