ParkerFly Posted February 11, 2019 Report Share Posted February 11, 2019 Picasso makes a cool spinnerbait with an Indiana main blade and a willow kicker. In my mixed condition fisheries here in Tulsa, seems like it would be a good fit. Can't find ANYWHERE what size blades they're using. Indiana blades in particular are hard for me to size. Any ideas? Quote Link to comment Share on other sites More sharing options...
cadman Posted February 11, 2019 Report Share Posted February 11, 2019 If you have a Picasso spinnerbait, measure the blade and start calling blade companies. Tell them the size you have and see if that matches their size blades. If not go on to the next company. Can find a lot of this by looking on the i-net. Eventually someone will have a blade close to what you want. Quote Link to comment Share on other sites More sharing options...
ParkerFly Posted February 11, 2019 Author Report Share Posted February 11, 2019 17 minutes ago, cadman said: If you have a Picasso spinnerbait, measure the blade and start calling blade companies. Tell them the size you have and see if that matches their size blades. If not go on to the next company. Can find a lot of this by looking on the i-net. Eventually someone will have a blade close to what you want. You're right. Just wanting to make a small quantity, and was hoping someone would have a Picasso lying around and could give me a ballpark. I don't happen to have one on hand and that model isn't sold locally. Quote Link to comment Share on other sites More sharing options...
kage_killa Posted February 11, 2019 Report Share Posted February 11, 2019 I found a sizing chart, not sure if that will help https://www.tacklecrafting.com/baits/wb_size_chart/ Quote Link to comment Share on other sites More sharing options...
Munkin Posted February 11, 2019 Report Share Posted February 11, 2019 https://www.picassooutdoors.com/Picasso_Spinnerbaits_Willow_Indiana_p/psb-wi.htm By the looks of this I would say it is a size 6 maybe 7. Allen Quote Link to comment Share on other sites More sharing options...
JBarlow Posted February 11, 2019 Report Share Posted February 11, 2019 Be careful when using size charts. Not all companies use the same size charts. The blade manufacturers do not have a standard when it comes to sizing. A size 6 from one manufacturer may not be the same length as a size 6 from a different manufacturer or company. 1 Quote Link to comment Share on other sites More sharing options...
Munkin Posted February 11, 2019 Report Share Posted February 11, 2019 1 hour ago, JBarlow said: Be careful when using size charts. Not all companies use the same size charts. The blade manufacturers do not have a standard when it comes to sizing. A size 6 from one manufacturer may not be the same length as a size 6 from a different manufacturer or company. Found that out the hard way myself. Allen Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 12, 2019 Report Share Posted February 12, 2019 I use the #6 Indiana blade in brass from LPO. Quote Link to comment Share on other sites More sharing options...
bladesandbaits Posted February 12, 2019 Report Share Posted February 12, 2019 Picasso w/Indiana back blade 3/8 oz= #5 1/2 oz =#6 3/4 oz =#7 Worth Indiana or can get them from Lureparts Online maybe Barlows Quote Link to comment Share on other sites More sharing options...
