whackett Posted February 25, 2019 Report Share Posted February 25, 2019 Can anyone help me find or get plans for a lure turner to be used as top coat is drying Have searched site and nothing comes up. I know there were plans on here a few years ago but none show up now Thanks for the help from anyone Quote Link to comment Share on other sites More sharing options...
Apdriver Posted February 25, 2019 Report Share Posted February 25, 2019 Here’s a thread that shows some pics of a lure turner. I built one much like this out of a grill rotisserie motor and mounted those spring steel paper clips around the circumference of the round plates on each end of the rotisserie. There’s no “plans” but I could take some measurements and more photos of mine, if you’re interested. Quote Link to comment Share on other sites More sharing options...
whackett Posted February 25, 2019 Author Report Share Posted February 25, 2019 Apdriver if it's not a lot of trouble I would appreciate it if you would do that so I had an idea what you did. Thanks a lot for the help Wayne Quote Link to comment Share on other sites More sharing options...
Apdriver Posted February 27, 2019 Report Share Posted February 27, 2019 Whackett, I took some photos today. PM sent. Quote Link to comment Share on other sites More sharing options...
