spbubba Posted February 26, 2019 Report Share Posted February 26, 2019 I have a Badger soltar 20/20 that has performed flawlessly for just over a year. It has begun intermittently spitting paint and air seems to escape around the nozzle and behind the trigger when back flushing. I have soaked it in restorer and didn't notice a change. Please help a newbie out with some advice. Quote Link to comment Share on other sites More sharing options...
Salty's Posted February 27, 2019 Report Share Posted February 27, 2019 Worn o rings would be my guess. 1 Quote Link to comment Share on other sites More sharing options...
ravenlures Posted March 1, 2019 Report Share Posted March 1, 2019 I agree with Salty...…….I also, if I could remember but I can't, so try you tube there was a guy that showed how to beef up your gun and fix leaks on them. Just try posting your problem on you tube and see what you get. Wayne Quote Link to comment Share on other sites More sharing options...
spbubba Posted March 1, 2019 Author Report Share Posted March 1, 2019 Thank you Quote Link to comment Share on other sites More sharing options...
DingerBaits Posted March 3, 2019 Report Share Posted March 3, 2019 if its coming out around where you screw the head into, try putting a little Carmex on their. Its the same stuff that is in their cleaning kits that they sell retail. If i remember correctly there is a small Teflon bearing right before the needle enters the cup region on the brush (I may be confusing it with an Iwata). check that. 1 Quote Link to comment Share on other sites More sharing options...
