wootonc Posted March 7, 2019 Report Share Posted March 7, 2019 Hello I am new to pouring of soft plastics. I have been making jigs buzz baits spinner baits shakey heads for about 6 years now. I am looking at getting into the injection of plastics mainly swim baits grubs and finesse worms. Looking for do's and don'ts before I wast a lot of money like I did when I started making jigs before I found this site. Best places to buy molds plastics and coloring's. Thanks for the help Quote Link to comment Share on other sites More sharing options...
BuckeyeFishing Posted March 7, 2019 Report Share Posted March 7, 2019 I mainly have coloring and glitter from M-F manufacturing, they work well for me. I also have some from Jann's Netcraft. Many people get their coloring and glitter from either lurecraft or Spike-it/Lureworks. Lots of places that make good colors but keep in mind that there are differences between the companies, even when its the "same" colorant. Lots of places to buy plastics too. I have used Do-It, Bait Plastics, and Dead On Plastix. All three have their pros and cons, but Do-It was probably my least favorite. 1 Quote Link to comment Share on other sites More sharing options...
alsworms Posted March 7, 2019 Report Share Posted March 7, 2019 Lure Craft and MF were my go-to places, but as mentioned, there are many other options out there now. 1 Quote Link to comment Share on other sites More sharing options...
makinbait Posted March 11, 2019 Report Share Posted March 11, 2019 Lots of great companies. Lurecraft, Bait Plastics, MF, Lureworks Quote Link to comment Share on other sites More sharing options...
Canga~ Posted March 11, 2019 Report Share Posted March 11, 2019 I use mostly LureWorks with a few Doit x2 as well. Both are good imo. I haven’t tried any Lurecraft yet but hear they are good as well. I have a couple mf colors as well, have to use a ton of it to get a darker color, but it was good otherwise. Quote Link to comment Share on other sites More sharing options...
Darkman Posted March 12, 2019 Report Share Posted March 12, 2019 For inks I buy from Lure craft, Spike it ( Lure works)and Dead on plastic for Glitter Lure craft and Spike it ( Lure works) plastic i am currently using Bait plastic ( Polysol) molds. Hand pour, Lure craft, Dead on and Moose ridge injection molds. Enforcer, Angling AI, BTS and Do it are my top choices i hope this helps, good luck, peace 1 Quote Link to comment Share on other sites More sharing options...
Runt4561 Posted June 12, 2019 Report Share Posted June 12, 2019 On 3/12/2019 at 3:37 AM, Erick Darkman Prado said: For inks I buy from Lure craft, Spike it ( Lure works)and Dead on plastic for Glitter Lure craft and Spike it ( Lure works) plastic i am currently using Bait plastic ( Polysol) molds. Hand pour, Lure craft, Dead on and Moose ridge injection molds. Enforcer, Angling AI, BTS and Do it are my top choices i hope this helps, good luck, peace I am familiar with BTS and Do it but does Enforcer, Angling and Al have websites? Quote Link to comment Share on other sites More sharing options...
Darkman Posted June 13, 2019 Report Share Posted June 13, 2019 Yes they do, Anglin AI is on word, and enforcer is based in Canada they both have there own web sites 1 Quote Link to comment Share on other sites More sharing options...
Les Young Posted June 14, 2019 Report Share Posted June 14, 2019 Enforcer, basstackle, del-mart & do-it are what molds i;ve used. Glitter & colorant i'm buying lureworks from ispikeit.com. I also like their plastic although right now i'm trying bait plastics, but the jurys still out on that. 1 Quote Link to comment Share on other sites More sharing options...
