Mad Moose Baits Posted July 16, 2019 Report Share Posted July 16, 2019 So I love to make YouTube videos and here is my latest and how I have started making vulcanized rubber molds. Yes, there are a couple of issues that are easy to fix (better master, proper hook size) but I am happy so for... Ned Rig Mold 2 Quote Link to comment Share on other sites More sharing options...
School Master Posted July 29, 2019 Report Share Posted July 29, 2019 Where did you buy the vulcanized blank? Seems like it has potential. I've been using high temp silicon to make 2 part molds for the last couple years. Works well, but they don't always last. 1 Quote Link to comment Share on other sites More sharing options...
Mad Moose Baits Posted July 29, 2019 Author Report Share Posted July 29, 2019 Red Silicone Mold Rubber 9"x 1" for Centrifugal Spin Casting Lead and tin Alloy https://www.amazon.com/dp/B07F2JP7Q8/ref=cm_sw_r_cp_apa_i_yo0pDbXCBWJKX 2 Quote Link to comment Share on other sites More sharing options...
School Master Posted July 29, 2019 Report Share Posted July 29, 2019 Very interesting. I wonder how it holds up compared to my method. My guess is a lot better! Thanks for sharing.... other than you just filled my Amazon cart..... Quote Link to comment Share on other sites More sharing options...
Joelh831 Posted July 31, 2019 Report Share Posted July 31, 2019 On 7/29/2019 at 12:06 PM, Mad Moose Baits said: Red Silicone Mold Rubber 9"x 1" for Centrifugal Spin Casting Lead and tin Alloy https://www.amazon.com/dp/B07F2JP7Q8/ref=cm_sw_r_cp_apa_i_yo0pDbXCBWJKX I have a question. What do you use to vulcanize the silicone mold rubber. I've been wanting to give this a shot. Thanks Quote Link to comment Share on other sites More sharing options...
Mad Moose Baits Posted July 31, 2019 Author Report Share Posted July 31, 2019 I use bolts and wingnuts through aluminum plates. It's in the video. Quote Link to comment Share on other sites More sharing options...
jcool3 Posted August 10, 2019 Report Share Posted August 10, 2019 (edited) Another source https://www.ottofrei.com/Castaldo-Econosil-Price-Per-Lb they have whole line of castaldo mold making supplies. Wonder where I can get a bigger frame than the standard 2 x 3 inches? Thinking of making one using square aluminum tubing 2 x2 inches ... Also I have t-shirt press which supplies heat and pressure, not sure how well that would work. Great video Mad Moose. Edited August 10, 2019 by jcool3 add 1 Quote Link to comment Share on other sites More sharing options...
Apdriver Posted August 11, 2019 Report Share Posted August 11, 2019 Very nice video and showed the process neatly. Thank you for sharing it. 1 Quote Link to comment Share on other sites More sharing options...
Musky Glenn Posted August 22, 2019 Report Share Posted August 22, 2019 What purpose did the alum frame serve? Very nice idea. Quote Link to comment Share on other sites More sharing options...
Dink Master Posted August 22, 2019 Report Share Posted August 22, 2019 Thank you Mad Moose I have been wanting to make a Spinner Bait mold Your video pushed me over the edge Thanks for sharing Quote Link to comment Share on other sites More sharing options...
Dink Master Posted August 22, 2019 Report Share Posted August 22, 2019 1 hour ago, Musky Glenn said: What purpose did the alum frame serve? Very nice idea. The rubber would spread/flatten to much during the heat/compression process Quote Link to comment Share on other sites More sharing options...
mark poulson Posted August 22, 2019 Report Share Posted August 22, 2019 29 minutes ago, Dink Master said: Thank you Mad Moose I have been wanting to make a Spinner Bait mold Your video pushed me over the edge Thanks for sharing You know you've been living on the edge for a long time! Hahaha Quote Link to comment Share on other sites More sharing options...
Dink Master Posted August 22, 2019 Report Share Posted August 22, 2019 2 minutes ago, mark poulson said: You know you've been living on the edge for a long time! Hahaha Yes Sir Mark it is that time of the year again. FLW Cal Delta. I will PM you in a few weeks 1 Quote Link to comment Share on other sites More sharing options...
Mad Moose Baits Posted August 22, 2019 Author Report Share Posted August 22, 2019 39 minutes ago, Dink Master said: Thank you Mad Moose I have been wanting to make a Spinner Bait mold Your video pushed me over the edge Thanks for sharing Dude that turned out great! I'm glad I was able to push someone other than my wife over the edge! LOL! Thanks for watching! Quote Link to comment Share on other sites More sharing options...
Mad Moose Baits Posted August 22, 2019 Author Report Share Posted August 22, 2019 On 8/10/2019 at 10:19 AM, jcool3 said: Another source https://www.ottofrei.com/Castaldo-Econosil-Price-Per-Lb they have whole line of castaldo mold making supplies. Wonder where I can get a bigger frame than the standard 2 x 3 inches? Thinking of making one using square aluminum tubing 2 x2 inches ... Also I have t-shirt press which supplies heat and pressure, not sure how well that would work. Great video Mad Moose. Have you been able to find other sizes? I found 2.5 x 3.75 x 1 HERE Sorry it took me a while to get back to you! 1 Quote Link to comment Share on other sites More sharing options...
Tally Posted August 22, 2019 Report Share Posted August 22, 2019 GREAT thread!!! this has given me some awesome ideas Tally Quote Link to comment Share on other sites More sharing options...
Munkin Posted September 3, 2019 Report Share Posted September 3, 2019 Where can I get one of those metal frames from? Allen Quote Link to comment Share on other sites More sharing options...
Mad Moose Baits Posted September 3, 2019 Author Report Share Posted September 3, 2019 15 minutes ago, Munkin said: Where can I get one of those metal frames from? Allen Posted the link in my reply a couple of comments up! Quote Link to comment Share on other sites More sharing options...
robbor Posted September 4, 2019 Report Share Posted September 4, 2019 On 7/16/2019 at 9:50 AM, Mad Moose Baits said: So I love to make YouTube videos and here is my latest and how I have started making vulcanized rubber molds. Yes, there are a couple of issues that are easy to fix (better master, proper hook size) but I am happy so for... Ned Rig Mold Good job on the mold. I'm glad someone used some of the info I posted. Let me know if u need any help. Rob Quote Link to comment Share on other sites More sharing options...
Mad Moose Baits Posted September 4, 2019 Author Report Share Posted September 4, 2019 19 minutes ago, robbor said: Good job on the mold. I'm glad someone used some of the info I posted. Let me know if u need any help. Rob Actually didn't see yours! I had found a couple of videos where the guy makes pendants and went from there. Did find your post via search just now. Nifty jigs! Quote Link to comment Share on other sites More sharing options...
jigmeister Posted September 12, 2019 Report Share Posted September 12, 2019 Great topic and video ! Instead of cutting a sprue afterwards a worm weight works great for a sprue shape . Drill a small hole in the master jig head just big enough for a short piece of spinnerbait arm wire . Put the wire in the hole you drilled and slide the worm weight onto the wire up against the master . Check alignment to make sure it's straight for a clean parting line . 1 Quote Link to comment Share on other sites More sharing options...
Mad Moose Baits Posted September 12, 2019 Author Report Share Posted September 12, 2019 54 minutes ago, jigmeister said: Great topic and video ! Instead of cutting a sprue afterwards a worm weight works great for a sprue shape . Drill a small hole in the master jig head just big enough for a short piece of spinnerbait arm wire . Put the wire in the hole you drilled and slide the worm weight onto the wire up against the master . Check alignment to make sure it's straight for a clean parting line . Awesome suggestion! I have started making cones from polymer clay but this is even easier. Quote Link to comment Share on other sites More sharing options...
Dink Master Posted September 13, 2019 Report Share Posted September 13, 2019 14 hours ago, jigmeister said: Great topic and video ! Instead of cutting a sprue afterwards a worm weight works great for a sprue shape . Drill a small hole in the master jig head just big enough for a short piece of spinnerbait arm wire . Put the wire in the hole you drilled and slide the worm weight onto the wire up against the master . Check alignment to make sure it's straight for a clean parting line . I do something similar. I use the sprue from some of my Do-it Molds. 1 Quote Link to comment Share on other sites More sharing options...
CRANKBAITKING Posted September 16, 2019 Report Share Posted September 16, 2019 You guys are awesome I’m just getting into the making my own molds game have a small soft plastics bait deal in my local area that’s doing really well and all my guys keep asking for stuff I can’t find molds for and I watched his vid on you tube and am hooked thanks so much and the the comment of useing a worm sinker with a spinner bait wire you guys are awesome again thanks I’m really glad I joined tackle underground Quote Link to comment Share on other sites More sharing options...
