Jig Man Posted July 30, 2019 Report Share Posted July 30, 2019 I put the non pin side on some 1500 grit paper. I had colored it like suggested. All parts sanded so no apparent warp here. i took the pins out of the other side and put the 2sides together. PERFECT FIT. Put the pins back in and bad fit. I remembered Thai the pin had come out and I had put a dab of super glue on it. Who’a thunk that would be thick enough to make the pin too long. NOT ME. So I sanded off the glue and the “warped mold is fixed”. Sometimes I hate being a READY FIRE AIM guy. 4 Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted July 31, 2019 Report Share Posted July 31, 2019 You figured it out, good engineering. As I was reading, I was going to suggest a 0.5mm CSK, obviously not necessary now. DAve 1 Quote Link to comment Share on other sites More sharing options...
Hillbilly voodoo Posted July 31, 2019 Report Share Posted July 31, 2019 When it comes to dumb mistakes you’re not alone 4 Quote Link to comment Share on other sites More sharing options...
