Thedude19 Posted January 4, 2020 Report Share Posted January 4, 2020 Got a dual injector kit from do it molds with the mixing block for Xmas and a ripper paddle tail swimbait mold . Having trouble getting a true 2 color bait. Mostly seems like when I shoot 2 different colors , they mix together or the whole bait is just 1 of the colors. No clear two color bait. This is my first attempt at injecting molds I have done about 20 baits and maybe 1 has come out right. Any advise would help thanks. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted January 5, 2020 Report Share Posted January 5, 2020 I have a 3 cavity Ripper ES mold, and only one of them would allow me to do a laminate with a dual injector, which I do not have. The other two cavities are fed off a common spru, so the two different colored plastics would get mixed as they are shot. Quote Link to comment Share on other sites More sharing options...
Thedude19 Posted January 5, 2020 Author Report Share Posted January 5, 2020 Marc Yes I have same es ripper mold . That must be the problem. Thanks for the help Quote Link to comment Share on other sites More sharing options...
Musky Glenn Posted January 6, 2020 Report Share Posted January 6, 2020 A difference of a few degrees will allow the hotter one to flow ahead of the cooler one. difference in thickness affects it also. Good luck. 1 Quote Link to comment Share on other sites More sharing options...
Frank Posted January 6, 2020 Report Share Posted January 6, 2020 The difference is that the mold is set up to be side by side not top to bottom. 2 Quote Link to comment Share on other sites More sharing options...
