Tubeman Posted February 2, 2020 Report Share Posted February 2, 2020 Does anybody know of a machinist or mold maker that manufacturers at 2 in outside diameter plastic injector ? I'm looking for one that shoots 12 to 20 oz. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Apdriver Posted February 4, 2020 Report Share Posted February 4, 2020 No, but you like em long and skinny, eh? 2 Quote Link to comment Share on other sites More sharing options...
hpssports Posted February 4, 2020 Report Share Posted February 4, 2020 Quality Injectors on Facebook makes up to a 20oz. injector & can custom make larger ones. Bait Plastics/Polysol is a dealer for their injectors but don't know if they carry the 20oz. 2 Quote Link to comment Share on other sites More sharing options...
MEL Posted February 4, 2020 Report Share Posted February 4, 2020 Do not forget for the same size injection hole the injection pressure goes up as the square. Long and skinny cools faster. MEL 2 Quote Link to comment Share on other sites More sharing options...
Tubeman Posted February 5, 2020 Author Report Share Posted February 5, 2020 Thanks for the information guys much appreciated! 1 Quote Link to comment Share on other sites More sharing options...
Canga~ Posted February 9, 2020 Report Share Posted February 9, 2020 I have a 12oz from quality injector, it’s not bad, I really like it. Unfortunately the O-rings it came with were garbage and weren’t useable after probably 10 uses, and I have not been able to find replacements (I think McMaster Carr sells them but not sure what size!) otherwise it’s a nice injector, not quality basstackle quality, but not far off Quote Link to comment Share on other sites More sharing options...
seakarp Posted February 9, 2020 Report Share Posted February 9, 2020 (edited) see below Edited February 9, 2020 by seakarp needed to add quote. Did so below Quote Link to comment Share on other sites More sharing options...
seakarp Posted February 9, 2020 Report Share Posted February 9, 2020 7 hours ago, Canga~ said: I have a 12oz from quality injector, it’s not bad, I really like it. Unfortunately the O-rings it came with were garbage and weren’t useable after probably 10 uses, and I have not been able to find replacements (I think McMaster Carr sells them but not sure what size!) otherwise it’s a nice injector, not quality basstackle quality, but not far off Maybe try taking the whole thing to a plumbing supply place and seeing if they can fit it with the proper size o ring. 1 Quote Link to comment Share on other sites More sharing options...
Canga~ Posted February 11, 2020 Report Share Posted February 11, 2020 On 2/9/2020 at 10:48 AM, seakarp said: Maybe try taking the whole thing to a plumbing supply place and seeing if they can fit it with the proper size o ring. yeah I will get around to it at some point, I bought a 10oz from basstackle one of the times they have had them in stock in the last 6months or so, its great, at some point ill get an oring for the quality injector and use that too. 1 Quote Link to comment Share on other sites More sharing options...
Tubeman Posted February 16, 2020 Author Report Share Posted February 16, 2020 I thought I would give a review of the 12 oz 2in diameter barrel injector after a few uses. First off its fit and finish is a 9.5 out of 10. The plunger head uses 2 o rings, which along with the extra plastic inside gives a bit more resistance and requires a little more force to inject. I found pre heating the injector helps as well as a bit of lube behind the plunger so it works smoothly. I usually use a 5 gallon hot pot 3/4 full with the injector hanging inside to keep it warm and I'm sure it will work better when I get to running a larger run of baits. The barrel could use a grip section near the top as its smooth 2" diameter is a little hard to hold on to. The metal T handle is a definete upgrade over the plastic style knob found on other smaller injectors. Overall a very nice product that is probably the only big hand injector on the market. Quote Link to comment Share on other sites More sharing options...
Les Young Posted February 16, 2020 Report Share Posted February 16, 2020 Sounds like it another good option if needed. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 16, 2020 Report Share Posted February 16, 2020 1 hour ago, Tubeman said: I thought I would give a review of the 12 oz 2in diameter barrel injector after a few uses. First off its fit and finish is a 9.5 out of 10. The plunger head uses 2 o rings, which along with the extra plastic inside gives a bit more resistance and requires a little more force to inject. I found pre heating the injector helps as well as a bit of lube behind the plunger so it works smoothly. I usually use a 5 gallon hot pot 3/4 full with the injector hanging inside to keep it warm and I'm sure it will work better when I get to running a larger run of baits. The barrel could use a grip section near the top as its smooth 2" diameter is a little hard to hold on to. The metal T handle is a definete upgrade over the plastic style knob found on other smaller injectors. Overall a very nice product that is probably the only big hand injector on the market. That thing is so big it made my monitor sag! Hahaha Quote Link to comment Share on other sites More sharing options...
