COLORMEFISHIN Posted February 12, 2020 Report Share Posted February 12, 2020 I am having trouble getting Daiwa to release back ordered parts. The cast control knob shim Pt # J21-3101 has been discontinued since August. Does anyone know if some other shim from another manufacturer can be used? Quote Link to comment Share on other sites More sharing options...
Musky Glenn Posted February 13, 2020 Report Share Posted February 13, 2020 I have cut them from an old feeler gauge. Good luck. Quote Link to comment Share on other sites More sharing options...
COLORMEFISHIN Posted February 14, 2020 Author Report Share Posted February 14, 2020 Thanks, but these are a fiber spacer, wonder if I can use a computer board bill and trim it... Quote Link to comment Share on other sites More sharing options...
cadman Posted February 23, 2020 Report Share Posted February 23, 2020 You can probably use any material, as long as it is the same thickness. If it is only a shim, a piece of cut copper works well also. Quote Link to comment Share on other sites More sharing options...
SlowFISH Posted February 24, 2020 Report Share Posted February 24, 2020 IIRC some Abu Garcia's use a "fiber" type board in the cast control knobs as well - reddish brown in color. Look at the Revo series reels (Premier/STX/etc) Gen 1s. J. Quote Link to comment Share on other sites More sharing options...
COLORMEFISHIN Posted March 7, 2020 Author Report Share Posted March 7, 2020 Thanks boys....Daiwa finally released them..... Quote Link to comment Share on other sites More sharing options...
