dolbs58 Posted March 4, 2020 Report Share Posted March 4, 2020 I recently purchased a Boggs Tackle Maker. My intentions were to use it to build small inline spinner baits such as rooster tails in the 1/8 - 1/4oz sizes. I attempted to use it and have found that it seems the rod (to make the closed loops), is not set up to make the loops in a bait in the 2" - 3 1/2" size range. Am I missing something or is it correct that the tacklemaker is only good for forming inline spinner baits from 5" in length and longer? Thanks for any help! Quote Link to comment Share on other sites More sharing options...
TerryF2858 Posted March 5, 2020 Report Share Posted March 5, 2020 I make inline spinners with one, they are probably close to the same as yours, it took some time to get it adjusted and getting them to come out. I use .026 wire 1 Quote Link to comment Share on other sites More sharing options...
azsouth Posted March 7, 2020 Report Share Posted March 7, 2020 It will help if you watch the video closely multiple times, your direction and pressure make all the difference. 1 Quote Link to comment Share on other sites More sharing options...
