Chuck Young Posted March 4, 2020 Report Share Posted March 4, 2020 I want to apply GID powders with my airbrush. My plan is to mix them into Createx transparent base. To date, I have been applying a thin epoxy layer and dusting the lure with powder. I want to get away from handling the powder. I have a fan spray booth and a theory that wet powder is less likely to fly than dry powder. The Techno Glow white powder that I am considering is 35 microns and is supposed to glow for 10 hours when fully charged. The add says it can be sprayed through a tip .35 in or smaller. I suspect that is a typo on their part. That is what I gap my spark plugs to! Plus I beg to ask "how much smaller?" This is a completely useless piece of info. So, my friends, I turn to you. What are your recommendations, experiences, and concerns. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted March 5, 2020 Report Share Posted March 5, 2020 I tried it, but I had to keep the amount of glo powder so low it took too many coats to get a good glow. Too much powder and it would clog my .35 tip. It's just too easy to add as much as I like to transparent base and brush it on. 1 Quote Link to comment Share on other sites More sharing options...
Chuck Young Posted March 16, 2020 Author Report Share Posted March 16, 2020 Thanks Mark. That sounds like the way to go. Quote Link to comment Share on other sites More sharing options...
