steelheadfreek92 Posted March 9, 2020 Report Share Posted March 9, 2020 hello everyone! im Dom im s steel head guide in northern Michigan and also a avid bass tournament fisherman and i love to make lures! but, i need some help from seasoned professionals, i have only made bodies and have tuned them. i want to know what air brush kit to purchase and paints i could use that are of good quality that do not break the bank also a led pot thing that keeps led hot and drips thanks so much everyone Quote Link to comment Share on other sites More sharing options...
Hillbilly voodoo Posted March 9, 2020 Report Share Posted March 9, 2020 For an airbrush I use an iwata neo and createx paints. Not an expensive airbrush but not a cheap one either I started with a cheap badger and the iwata neo has made a big difference in my opinion There is members with more painting knowledge then me that will hopefully chime in 1 Quote Link to comment Share on other sites More sharing options...
steelheadfreek92 Posted March 9, 2020 Author Report Share Posted March 9, 2020 perfect thanks! man i gotta get everything i made a big rotary dryer allready but i need the down to the stuff to buy to from regulators to pain lol green Quote Link to comment Share on other sites More sharing options...
Travis Posted March 9, 2020 Report Share Posted March 9, 2020 (edited) You will need to define "break the bank". Personally Iwata HP-SPS. I used cheaper brushes in the past and gladly paid the 150 for better brush and should have sooner. Createx about the cheapest paint I will mess with now. Have sprayed and still do on occasion some of the cheap craft paints thinned just a lot more issues that are best to avoid in comparison to specially designed airbrush paints. You can get buy with cheaper brush. I painted cranks almost 30 years ago in my dorm room with a cheap testors plastic airbrush and screw in compressed air. Results came out fine but spent a lot more time doing so and was far less enjoyable. Edited March 9, 2020 by Travis 1 Quote Link to comment Share on other sites More sharing options...
steelheadfreek92 Posted March 9, 2020 Author Report Share Posted March 9, 2020 anywhere from 100-190$ Quote Link to comment Share on other sites More sharing options...
steelheadfreek92 Posted March 10, 2020 Author Report Share Posted March 10, 2020 just ordered a Iwata HP-SPS.! thank you brotha! hows the steelheading there in indy? Quote Link to comment Share on other sites More sharing options...
DGagner Posted March 10, 2020 Report Share Posted March 10, 2020 1 hour ago, steelheadfreek92 said: just ordered a Iwata HP-SPS.! thank you brotha! hows the steelheading there in indy? I've got the HP-CS but the one you chose is sort of new but is supposed to be very good with smaller stuff. It should be a very good choice. It is pretty expensive though. Anyway, it's an iwata , you can't go wrong. Let us know how it works! 1 Quote Link to comment Share on other sites More sharing options...
steelheadfreek92 Posted March 10, 2020 Author Report Share Posted March 10, 2020 thanks man 1 Quote Link to comment Share on other sites More sharing options...
