Pop Posted March 23, 2020 Report Share Posted March 23, 2020 Just starting with injection molds. Most companies are out of stock for the injectors. I'm looking for a 6oz injector and would appreciate recommendations. Should mention I would prefer a locking injector. All help is appreciated. Do-It Molds has their injector available but they are not locking. Are they good injectors? Thanks again. Pop Quote Link to comment Share on other sites More sharing options...
Socal399 Posted March 23, 2020 Report Share Posted March 23, 2020 I just ordered bass tackles 6oz twin injector las Monday and got it on Friday. I know it shows I there website the single is sold out but u might want to call them and see if that is actually true. 1 Quote Link to comment Share on other sites More sharing options...
Musky Glenn Posted March 23, 2020 Report Share Posted March 23, 2020 The one I use doesn't lock and so far I am very satisfied with it. I did push the end off one time when emptying it. I now know how little pressure it takes to empty and haven't pushed it off again. 1 Quote Link to comment Share on other sites More sharing options...
Les Young Posted March 24, 2020 Report Share Posted March 24, 2020 Basstackle every time. I have one of the ukraine 4 ounce twin injectors with blending block that i'd sale cheap, but you'd have to put new o rings in it & probably make a notch to remove the ends like Musky Glenn did his. 1 Quote Link to comment Share on other sites More sharing options...
Pop Posted March 29, 2020 Author Report Share Posted March 29, 2020 Thanks for all replies. I will continue to try and purchase a new Bass Tackle twin injector and blending block. As a side, I live in Pocono Lake Pennsylvania and have quite a few boxes of popcorn salt. If you are in the area I will GIVE some boxes to anyone that uses salt in their baits. Best fishing. Pop 1 Quote Link to comment Share on other sites More sharing options...
Les Young Posted March 29, 2020 Report Share Posted March 29, 2020 Quote Link to comment Share on other sites More sharing options...
aulrich Posted April 14, 2020 Report Share Posted April 14, 2020 I have the do-it injectors and they are OK, but just yesterday I go the 8oz locking injector from BaitPlastic , it's build like a brick outhouse compared to the do-it injectors. Quote Link to comment Share on other sites More sharing options...
Pop Posted April 14, 2020 Author Report Share Posted April 14, 2020 Thanks, I will take a look at them. Pop Quote Link to comment Share on other sites More sharing options...