RAW OUTDOORS Posted April 5, 2020 Report Share Posted April 5, 2020 Long time reader and now I need some ideas on how to put some raised warts on my jigs. I see a bunch a companies are building jigs with epoxy dots that are raised up. Does anyone have any idea how to get this effect? Quote Link to comment Share on other sites More sharing options...
BobP Posted April 6, 2020 Report Share Posted April 6, 2020 I can think of two ways. Put dye in a thick glue type epoxy like Devcon Two Ton, daub it on and , put on a lure turner for an hour, then allow it to cure for a day.. Second, put dye in some UV cured polyester resin, daub it on and cure in a UV lamp or outside in sunlight for a few minutes. 3 Quote Link to comment Share on other sites More sharing options...
jrhopkins Posted April 12, 2020 Report Share Posted April 12, 2020 did this before on frogs. mix a little 5 minute epoxy with a DAB of paint for color , use a toothpick to apply a small drop to the lure, alternately hold lure upside down and right side up again. this will allow the droplet to raise to whatever size you need. with the 5 minute epoxy it will get rigid quickly but not completely cured. try it on a scrap piece and you'll get the idea. 1 Quote Link to comment Share on other sites More sharing options...
