Jig Man Posted May 5, 2020 Report Share Posted May 5, 2020 A friend wants to make some stand up shakey head jigs with the wires like the perfection sure hook up jig. I tried rtv silicone and it isn’t going to be durable. I am going to try JB WELD next. What else would you brainiacs suggest? I am wide open. Quote Link to comment Share on other sites More sharing options...
jigmeister Posted May 6, 2020 Report Share Posted May 6, 2020 I guess you could drill into the mold cavity from the outside and put a couple of pieces of .030 spinnerbait wire into the mold and pour the lead in . After cooling pull the two wire pins and insert the two fine stand up wires into the holes and use a spring loaded centering punch to close up the holes tightly against the stand up wires . You could also try bending 1/8 " from the ends of the stand up wires over forming a barb . Shove into the hole and they would be hard to pull out . 1 Quote Link to comment Share on other sites More sharing options...
Jig Man Posted May 6, 2020 Author Report Share Posted May 6, 2020 Thank you for the ideas. Quote Link to comment Share on other sites More sharing options...
