Jig Man Posted August 15, 2020 Report Share Posted August 15, 2020 A few years ago one of my friends quit bass fishing and became a crappie guy. I bought all of his hooks. Most were in 1000 count boxes. However there was a zip lock bag with some brass colored 90° jig hooks in 2/0. They are a little larger than an Eagle Claw 570 and a lot stronger. They are good for shaky in laydowns and brush piles. I am seriously running low and don’t have any idea what to order. Any thoughts? Quote Link to comment Share on other sites More sharing options...
cadman Posted August 15, 2020 Report Share Posted August 15, 2020 Jig Man do you have a pic with dimensions and maybe a wire diameter size? A Gami 604 hook is heavier than a 570. You have a PM from me. Quote Link to comment Share on other sites More sharing options...
Jig Man Posted August 15, 2020 Author Report Share Posted August 15, 2020 Ok I will have a closer look and add a pic with more info. Quote Link to comment Share on other sites More sharing options...
Jig Man Posted August 15, 2020 Author Report Share Posted August 15, 2020 Ted I hope this is enough info. I apologize for the sloppy writing. I had hand surgery a couple of weeks ago and it is still a work in progress. The top hook is the one I am looking for. The bottom is a 570 for comparison. The only size I use in this hook is a 2/0. Quote Link to comment Share on other sites More sharing options...
cadman Posted August 15, 2020 Report Share Posted August 15, 2020 (edited) Jig Man, The closest I found to what you are looking for is the Gami 604. See attached pic. These numbers are almost there with-in a 1/16 of an inch in length and close to the other dimensions. If you need more dimensions, let me know. Edited August 15, 2020 by cadman 1 Quote Link to comment Share on other sites More sharing options...
Jig Man Posted August 15, 2020 Author Report Share Posted August 15, 2020 Thanks. Check your pm. Quote Link to comment Share on other sites More sharing options...
Jeff Hahn Posted August 16, 2020 Report Share Posted August 16, 2020 Eagle Claw used to make their regular 570 and also a heavy wire version of the same hook. They did this with several of their smaller hooks. You might be looking for the heavy wire version of the 570. 1 Quote Link to comment Share on other sites More sharing options...
cadman Posted August 16, 2020 Report Share Posted August 16, 2020 16 hours ago, Jeff Hahn said: Eagle Claw used to make their regular 570 and also a heavy wire version of the same hook. They did this with several of their smaller hooks. You might be looking for the heavy wire version of the 570. Jeff I inquired about these hooks several years ago, and if I recall correctly EC didn't make them anymore. Now someone somewhere probably has some in stock. The question is who. 1 Quote Link to comment Share on other sites More sharing options...
Fatman Posted August 18, 2020 Report Share Posted August 18, 2020 Would that be the Eagle Claw 630?? That's the heavy wire version of the 570 and Capt hooks has those if it's the right one. Quote Link to comment Share on other sites More sharing options...
ute Posted August 18, 2020 Report Share Posted August 18, 2020 You might check the Eagle Claw L3052. Quote Link to comment Share on other sites More sharing options...
cadman Posted August 18, 2020 Report Share Posted August 18, 2020 6 hours ago, Fatman said: Would that be the Eagle Claw 630?? That's the heavy wire version of the 570 and Capt hooks has those if it's the right one. The 630 is an O'Shaughnessy Jig Hook, there is(was) an exact 570 hook profile only in a heavier wire. Quote Link to comment Share on other sites More sharing options...
m.t.pockets Posted August 18, 2020 Report Share Posted August 18, 2020 wasn't that the 570h which is still available Quote Link to comment Share on other sites More sharing options...
Jeff Hahn Posted August 19, 2020 Report Share Posted August 19, 2020 4 hours ago, m.t.pockets said: wasn't that the 570h which is still available I believe that is how Eagle Claw designated their heavier hooks...same model number but with an "H" after it. Quote Link to comment Share on other sites More sharing options...
cadman Posted August 19, 2020 Report Share Posted August 19, 2020 I didn't think the 570 h's were that thick (.046) but apparently they are. Maybe I was thinking of the old Mustad bronze hook that was around (.039-.040) Quote Link to comment Share on other sites More sharing options...
app Posted September 21, 2020 Report Share Posted September 21, 2020 (edited) Looks like the ec 574 jig hook Edited September 21, 2020 by app Quote Link to comment Share on other sites More sharing options...
