IronBass Posted August 16, 2020 Report Share Posted August 16, 2020 Can 2 part silicone molds be hand injected. I have never tried, I don’t know it the softness of the silicone Mold could cause a deformity in the bait? Quote Link to comment Share on other sites More sharing options...
Jazzatomo Posted August 17, 2020 Report Share Posted August 17, 2020 I've made a couple, haven't had any issues of deformation, but I clamp my mould gently between 2 pieces of wood. If you clamped harder the cavity would probably distort or space would appear increasing your chance of flashing. 1 Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted August 20, 2020 Report Share Posted August 20, 2020 Makelure.com has some good video of injecting a silicone mold. With the right Silicone, it works well. Quote Link to comment Share on other sites More sharing options...
Joe bait Posted October 14, 2020 Report Share Posted October 14, 2020 We have used silicone molds encased in an aluminum housing/box and it works very well . Very very intricate creatures can be molded. The aluminum box “frame” was purchased from a desktop hard plastic injection molder company LNS Technologies .. The silicone to make the mold came from smooth on 1 Quote Link to comment Share on other sites More sharing options...
