Outlaw4 Posted September 18, 2020 Report Share Posted September 18, 2020 Pouring some jigs with Owner Hooks, having an issue with the lead not wanting to bond to the hook. Thoughts? Using a Lee PPIV, dial on 8. Pure lead. On a few of the ones that were loose i tourched off the lead and repoured and then they were fine. Is there something with the coating on hooks maybe? Quote Link to comment Share on other sites More sharing options...
Apdriver Posted September 18, 2020 Report Share Posted September 18, 2020 Usually lead doesn’t “bond” to hardened steel. It stays put because of the bend in the hook. If you demold be pulling the hook, especially on smaller baits, you can loosen the hook. Try pulling on sprue to demold. You can grab it with a pair of pliers. You may need to harden your lead a bit if this doesn’t work. 1 Quote Link to comment Share on other sites More sharing options...
Outlaw4 Posted September 21, 2020 Author Report Share Posted September 21, 2020 10-4 thanks. Its odd as for me it follows Owner hooks. Same for me with buzzbaits...i did a few of those this weekend and had fits with the Owner hooks and no issue with VMC's both 5/0's. I'll have to get some more and try a few things. I thought about the demolding thing and actually left some in the mold over night and those were loose as well, and i ladle poured those i was kind of surprised they were loose. Quote Link to comment Share on other sites More sharing options...
dlaery Posted September 21, 2020 Report Share Posted September 21, 2020 On 9/18/2020 at 12:53 PM, Apdriver said: Usually lead doesn’t “bond” to hardened steel. It stays put because of the bend in the hook. If you demold be pulling the hook, especially on smaller baits, you can loosen the hook. Try pulling on sprue to demold. You can grab it with a pair of pliers. You may need to harden your lead a bit if this doesn’t work. X2, Quote Link to comment Share on other sites More sharing options...