Waspi head cement

[4/0]

I have some Waspi head cement and every time I use it it drys " milky looking " not clear. It is solvent based .  The thread is some Ultra and Danville 210 flat lightly waxed and also some polyester thread,, " milky " on all of these.

I would like to have something that I can have in a dropper bottle with a needle type tip as I am tying. Using Bucktail and sometimes some synthetic type hair from LPO.

Thanks.

[TerryF2858]

It could be the solvent is reacting to the wax on the thread, I do not use any thread with wax on for my bucktails, and I use clear lacquer from the auto store, it is premixed and I just poke 2 holes in the top, and put screws in the holes to reseal it. my thread is nylon size a.

[Anyfish]

Not sure what causes the problem.  I typically use clear hard as nails finger nail polish.  You may be able to put it in the type of container you noted.  

 

[4/0]

Thanks,

I used to use a lot of lacquer when I was building cabinets. Have been using some of the hard as nails because of the " milky" problem. The Waspi seems like it penetrating better but the end color is bad.

I'm using a throw away brush and this what it drys like on the bristles. The squeeze type bottle with the needle would be convenient.

 

[Fatman]

I don't know what to tell you as I don't use any on my hair ties.  

[4/0]

I"ll just chalk it up to experience. The goal was to bind the hair and try to get a buildup on the thread when finished. I ordered some " Hard as Hull" and we"ll see how that goes.

Thanks,

4/0