Fishin Big Posted March 4, 2021 Report Share Posted March 4, 2021 What's the best way to arrange colors on a skirt once you stack them? They seem to move around after being pulled through the skirt tool. Quote Link to comment Share on other sites More sharing options...
jigmeister Posted March 5, 2021 Report Share Posted March 5, 2021 Tie the skirt strands onto the jighead one color layer at a time with thread and they will stay put . This is only feasible if you're making them for yourself and not selling as it's too time consuming otherwise. 1 1 Quote Link to comment Share on other sites More sharing options...
Jig Man Posted March 5, 2021 Report Share Posted March 5, 2021 11 hours ago, jigmeister said: Tie the skirt strands onto the jighead one color layer at a time with thread and they will stay put . This is only feasible if you're making them for yourself and not selling as it's too time consuming otherwise. X2 and forget the tool and bands. Use wire. 1 1 Quote Link to comment Share on other sites More sharing options...
kingmfg Posted March 6, 2021 Report Share Posted March 6, 2021 If you are pulling 2 or 3 different colors thru a skirt tool when the tabs are just inside the tube lift and separate the two top tabs leaving the bottom tab alone. Pull thru.they should look separated. Glued skirts solve this problem 1 1 Quote Link to comment Share on other sites More sharing options...
Fishin Big Posted March 8, 2021 Author Report Share Posted March 8, 2021 On 3/6/2021 at 3:05 PM, kingmfg said: If you are pulling 2 or 3 different colors thru a skirt tool when the tabs are just inside the tube lift and separate the two top tabs leaving the bottom tab alone. Pull thru.they should look separated. Glued skirts solve this problem I will try that, those look good. Quote Link to comment Share on other sites More sharing options...
