bryanmc Posted March 8, 2021 Report Share Posted March 8, 2021 I know it's a long shot, but does anybody know where you can get a replacement fan for the gear motor (I think it's a Dayton) we use on presto pots. Mine's in pretty bad shape and I'd like to replace it. I saw one somewhere a year or so ago when I was looking for something else but can't find it again. Thanks. Quote Link to comment Share on other sites More sharing options...
SlowFISH Posted March 9, 2021 Report Share Posted March 9, 2021 McMaster Carr should have a bunch - just look at spec on the one you have. Look for Compact AC Gearmotors. Quote Link to comment Share on other sites More sharing options...
bryanmc Posted March 10, 2021 Author Report Share Posted March 10, 2021 On 3/9/2021 at 8:16 AM, SlowFISH said: McMaster Carr should have a bunch - just look at spec on the one you have. Look for Compact AC Gearmotors. I contacted them. They don't carry Dayton motors so they don't have any parts. They suggested contacting the manufacturer, but I can't find any info on Dayton. Quote Link to comment Share on other sites More sharing options...
jigmeister Posted March 11, 2021 Report Share Posted March 11, 2021 Graingers carries Dayton brand gear motors 1 Quote Link to comment Share on other sites More sharing options...
bryanmc Posted March 11, 2021 Author Report Share Posted March 11, 2021 10 hours ago, jigmeister said: Graingers carries Dayton brand gear motors I wasn't able to find the fan listed in the parts section. Did you see it somewhere? Quote Link to comment Share on other sites More sharing options...
jigmeister Posted March 11, 2021 Report Share Posted March 11, 2021 How big of a motor is this ( 1/10 horsepower for example ) and is it an AC , DC , or Universal motor ? Is there a nameplate on the motor you're replacing? If you can't specifically find a Dayton you could use a different brand with the correct rating and physical size . Can you post a picture of the motor and nameplate Quote Link to comment Share on other sites More sharing options...
bryanmc Posted March 11, 2021 Author Report Share Posted March 11, 2021 2 minutes ago, jigmeister said: How big of a motor is this ( 1/10 horsepower for example ) and is it an AC , DC , or Universal motor ? Is there a nameplate on the motor you're replacing? If you can't specifically find a Dayton you could use a different brand with the correct rating and physical size . Can you post a picture of the motor and nameplate The motor is an AC gear motor Dayton model 1LNG1. The fan is a 4 blade plastic one. Here the product info from the grainger website: Quote Link to comment Share on other sites More sharing options...
jigmeister Posted March 11, 2021 Report Share Posted March 11, 2021 (edited) follow link DAYTON AC Gearmotor 115 Nameplate RPM 52 RPM Max. Torque 25.0 in-lb Enclosure Open - 1LNG1|1LNG1 - Grainger I just added this to cart so it appears to be in stock Edited March 11, 2021 by jigmeister addition Quote Link to comment Share on other sites More sharing options...
jigmeister Posted March 11, 2021 Report Share Posted March 11, 2021 I searched Ebay with the Dayton 1LNG1 model number and several came up there also Quote Link to comment Share on other sites More sharing options...
bryanmc Posted March 11, 2021 Author Report Share Posted March 11, 2021 6 hours ago, jigmeister said: I searched Ebay with the Dayton 1LNG1 model number and several came up there also You must have missed that I'm only looking for a replacement fan for that motor, not an entire motor. Quote Link to comment Share on other sites More sharing options...
jigmeister Posted March 11, 2021 Report Share Posted March 11, 2021 (edited) Sorry about the misunderstanding on my part . Speaking of parts though I did find Dayton part # for just the fan for your motor Dayton # 46-6-3 Grainger should be able to get this part being a Dayton distributor Grainger also sells a Dayton 4 blade 2.5" plastic fan # 5JKL5 that could be a match for your motor Edited March 11, 2021 by jigmeister error 1 Quote Link to comment Share on other sites More sharing options...
Frank Posted March 12, 2021 Report Share Posted March 12, 2021 Try one of these they are maybe a little big but as long as the shaft is right then is should work https://www.sciplus.com/black-fan-blade-40629-p?gclid=Cj0KCQiAnKeCBhDPARIsAFDTLTK2VOGw_DBJXZY_C9TkyAdktWHMl2S3_ENcovCy9ePnr-OURryveekaAsscEALw_wcB https://www.supplyhouse.com/Packard-A61302-3-1-2-Plastic-4-Blade-CCW-Fan-Blade-3-16-Bore?gclid=Cj0KCQiAnKeCBhDPARIsAFDTLTK9tDXGLPionbnQ8SP738Mkx1wzS_ul1Ncsp10k3vMg3iCVQ0ZDe_4aApo1EALw_wcB Quote Link to comment Share on other sites More sharing options...
bryanmc Posted March 12, 2021 Author Report Share Posted March 12, 2021 (edited) 13 hours ago, jigmeister said: Speaking of parts though I did find Dayton part # for just the fan for your motor Dayton # 46-6-3 Grainger should be able to get this part being a Dayton distributor I also found that number (46-6-3) through one of the PDFs attached to the listing for the motor. Called Grainger and it's no longer available, but he did give me some numbers for a couple that may work. Just need to find some calipers to get a reasonable measurement of the shaft it goes on. Thanks Edited March 12, 2021 by bryanmc Quote Link to comment Share on other sites More sharing options...
jigmeister Posted March 12, 2021 Report Share Posted March 12, 2021 The fan shaft diameter is shown as .187 on a Dayton drawing for your gearmotor (which works out to 3/16" ) and the fan dia. was shown as 2.63" (so 2.5" is probably the closest size available ) Quote Link to comment Share on other sites More sharing options...
bryanmc Posted March 12, 2021 Author Report Share Posted March 12, 2021 Thanks Jigmeister! Saved me a step. Quote Link to comment Share on other sites More sharing options...
