madbass Posted November 30, 2004 Report Share Posted November 30, 2004 Where do I find the tool for cutting the tails into a tube? Quote Link to comment Share on other sites More sharing options...
charkins Posted November 30, 2004 Report Share Posted November 30, 2004 Lurecraft has one that is fair. Just be sure to put plenty of worm oil on it before you cut the tails. Cal Quote Link to comment Share on other sites More sharing options...
nova Posted November 30, 2004 Report Share Posted November 30, 2004 There are plenty of posts here about them. Just do a search for " tube cutters". Also some pictures. Quote Link to comment Share on other sites More sharing options...
Jig Man Posted November 30, 2004 Report Share Posted November 30, 2004 We use carpet knife blades bolted together, placed in a vise and roll a dowel rod over the tube. Cheap but effective. Quote Link to comment Share on other sites More sharing options...
nova Posted November 30, 2004 Report Share Posted November 30, 2004 That is similar to what I did. I glued the blades in a piece of plywood and I use a large dowel to roll the tubes over the blades. I can cut about a dozen tubes at one time. I posted a picture of it here some time ago. Quote Link to comment Share on other sites More sharing options...
