cadman Posted December 29, 2021 Report Share Posted December 29, 2021 (edited) Does anybody have actual caliper dimensions of the following WTP 3d eyes. Barlow's has overall even fractions, but I would like to have the dimensions of the diameter in decimal (thousands). for example: 4 MEY is approx (.231) 4-1/2 MEY 5 MEY 5-1/2 MEY 6 MEY 6-1/2 MEY 7 7-1/2 MEY I'd like to order eyes but I want to make sure of the diameter. I called WTP today, but they are closed until Jan 3rd. Any help would be appreciated. Edited December 29, 2021 by cadman Quote Link to comment Share on other sites More sharing options...
JBarlow Posted December 29, 2021 Report Share Posted December 29, 2021 Here is what I measure them at... 1/8 - 0.117 5/32 - 0.154 3/16 - 0.180 7/32 - 0.215 1/4 - 0.233 9/32 - 0.276 5/16 - 0.292 3/8 - 0.363 7/16 - 0.434 1/2 - 0.481 9/16 - 0.555 5/8 - 0.633 These are my approximate measurements. All measured with calipers...not converted from fractions. Since I do not order them I do not know what the MEY of each is. JB 1 Quote Link to comment Share on other sites More sharing options...
cadman Posted December 29, 2021 Author Report Share Posted December 29, 2021 8 minutes ago, JBarlow said: Here is what I measure them at... 1/8 - 0.117 5/32 - 0.154 3/16 - 0.180 7/32 - 0.215 1/4 - 0.233 9/32 - 0.276 5/16 - 0.292 3/8 - 0.363 7/16 - 0.434 1/2 - 0.481 9/16 - 0.555 5/8 - 0.633 These are my approximate measurements. All measured with calipers...not converted from fractions. Since I do not order them I do not know what the MEY of each is. JB That is excellent information. I can decipher everything from the info you provided. Thank You, hopefully you have most of these in red. I will be placing an order tomorrow. 1 Quote Link to comment Share on other sites More sharing options...
