Nruds Posted March 5, 2022 Report Share Posted March 5, 2022 Hi Looking for some more information on electrostatic conveyor painting system for lead heads. specifically a gun/ paint box set up that only coats the top half of the jig and the recovery system. from what I gather there are systems out there that don’t require the jugs to be masked off. Any insight into this would be much appreciated Quote Link to comment Share on other sites More sharing options...
mark poulson Posted March 13, 2022 Report Share Posted March 13, 2022 When I learned about electrostatic paint from my wrought iron fabricator (twenty+ years ago), he said the two main advantages to it were far less waste, because the atomized paint was attracted to the electrically charged metal, and the complete coverage, because the paint mist was attracted to any uncovered metal surface. I doubt you'll be able to coat only part without some kind of masking. Quote Link to comment Share on other sites More sharing options...
