pro-z Posted August 16, 2022 Report Share Posted August 16, 2022 Does anyone happen to own fat guys 2.3 or 2.5 BA Stingertail mold. Is it know for denting? I have the Basstackle 669 Stinger and its horrible at denting. Thanks! Quote Link to comment Share on other sites More sharing options...
alsworms Posted August 16, 2022 Report Share Posted August 16, 2022 You might try injecting slower and at higher temps. I was a hand-pour guy and rarely injected, but this was usually the case with the few that I had. Good luck! Quote Link to comment Share on other sites More sharing options...
Les Young Posted August 17, 2022 Report Share Posted August 17, 2022 I ujst got the 2" ba series stinger tail shad mold a couple weeks ago & then also bought a 60 cavity tail mold. Both are outstanding molds & haven't had any problem whatsoever. 1 Quote Link to comment Share on other sites More sharing options...
Les Young Posted August 17, 2022 Report Share Posted August 17, 2022 Are you getting your plastic to hot or are yoiui injecting the basstackle mold to fast? Are you holding pressure for a few seconds after shooting it? Just asking because i've never had any issues whatsoever with any basstackle molds that i have. 1 Quote Link to comment Share on other sites More sharing options...
