ScottKelley Posted September 21, 2022 Report Share Posted September 21, 2022 I am sure this is posted in here somewhere but if you want to tie a flipping jig with a weed guard installed what is the best way to move it out of the way to help with tying without messing up the weed guard ? Quote Link to comment Share on other sites More sharing options...
cadman Posted September 21, 2022 Report Share Posted September 21, 2022 Are you using wire or thread. Wire is easier, as you only need to make two or three wraps. I put a rubber collar over the skirt I want to tie on. I then slide the skirt with the rubber collar over onto the jig. I start my wire all the way at the top of the jig head, wrap it several times, twist, cut and then slide the rubber collar off. No need to move the weedguard. If I were using thread. I would tie the skirt and then put in the weedguard later. 1 Quote Link to comment Share on other sites More sharing options...
21xdc Posted September 21, 2022 Report Share Posted September 21, 2022 2 wraps of 20-22 gauge wire is perfect. 1 Quote Link to comment Share on other sites More sharing options...
Dink Master Posted October 29, 2022 Report Share Posted October 29, 2022 A Elastic Band and a piece of Aluminium Tube. 2 1 Quote Link to comment Share on other sites More sharing options...
