black label plugs Posted January 4, 2005 Report Share Posted January 4, 2005 I HAVE BEENUSING FLEX COAT TO FINISH MY BAITS. IT IS A LITTLE TO SOFT. IS THERE A BETTER KIND THEN FLEX COAT.THANKS Quote Link to comment Share on other sites More sharing options...
SeminoleFan Posted January 4, 2005 Report Share Posted January 4, 2005 Try Devcon 2 ton epoxy! You can get it at walmart or any hardware store. Quote Link to comment Share on other sites More sharing options...
RiverMan Posted January 4, 2005 Report Share Posted January 4, 2005 Have you tried letting the FC set up some before applying it? I don't think many guys use FC to finish lures on this site but certainly there are some. If I were to use the FC I would let it set up for 10 or 15 minutes until it was slightly syrup-like and then apply it. This will allow you to put on coats that are slightly thicker than you could otherwise. Beyond that order yourself some Envirotex lite or use Devcon from Wal-Mart. jed Quote Link to comment Share on other sites More sharing options...
kellure Posted January 4, 2005 Report Share Posted January 4, 2005 I'll second the clear 2-ton devcon. http://www.devcon.com/devconfamilyproduct.cfm?familyid=179 Quote Link to comment Share on other sites More sharing options...
Striperknight Posted January 5, 2005 Report Share Posted January 5, 2005 Make sure to use the 30 min stuff. 5 min yellows bad fast. Quote Link to comment Share on other sites More sharing options...
