muskietom51 Posted January 10, 2005 Report Share Posted January 10, 2005 Hey guys I've got this giant grum 8 inches long that I'd like to rig a 4/0 treble hook to it, on a spiner bait. Anyone have any suggestions as to how this is done or a picture would really help Quote Link to comment Share on other sites More sharing options...
woodsac Posted January 10, 2005 Report Share Posted January 10, 2005 You want a spinner arm coming out the front with a blade on the end, and a treble hanging from the bottom of the bait? Quote Link to comment Share on other sites More sharing options...
Big Splash Posted January 10, 2005 Report Share Posted January 10, 2005 There was a pic in the gallery of a grub with a treble in it, I asked the same question. If I remember, it was done by cutting the bait, then glueing it with soft bait glue. Quote Link to comment Share on other sites More sharing options...
FishBooger Posted January 11, 2005 Report Share Posted January 11, 2005 Hi If you want to put a wire through a large grub and have a hook on one end and a blade on the other end - I have a suggestion for you. I'm not sure where I got this idea from - dont know where to give credit for it. I haven't tried it so don't know myself if it will good or not. You need a small diameter aluminum or copper tube just large enough for the wire to go through the iside. Take one end of the tube and sharpen an edge to it so you can cut a wire hole through the grub. And then put the wire through the grub. HTH Quote Link to comment Share on other sites More sharing options...
MarshManiaC Posted January 11, 2005 Report Share Posted January 11, 2005 to pull the non-business end of a hook through my lures I use a small crochet needle Quote Link to comment Share on other sites More sharing options...
