Where can I find RH and LH topwater propellers?

[21xdc]

I'm looking for 1in, 1 1/4, and 1 1/2 inch right hand and left hand rotating props.... I'm going to be making some baits similar to these below. I want the blades to counter rotate.

NO CHOPPER BLADES.... I have a ton already.

[mark poulson]

I just twist the prop in the opposite direction when I want counter rotating.

I get my props here:  https://www.lurepartsonline.com/Lure-Making/Shop-By-Product-Category/Crankbaits-Plugs-Hardware/Plug-Hardware

[21xdc]

Many lure companies use counter rotating blades. They must be available somewhere.... I don't want to bend blades and be inconsistent.  And ruin nickel plating. 

[mark poulson]

  On 3/15/2023 at 8:46 AM, 21xdc said:

Many lure companies use counter rotating blades. They must be available somewhere.... I don't want to bend blades and be inconsistent.  And ruin nickel plating. 

Expand  

Close by eye counts.  I haven't had the plating fail yet, and some of my baits are 5+ years old.

[21xdc]

  On 3/15/2023 at 8:46 AM, 21xdc said:

Many lure companies use counter rotating blades. They must be available somewhere.... I don't want to bend blades  

Expand  

I want to buy some ready to use.... 

[benton B]

I just bend the tail prop to counter the nose prop, I've not seen any blades advertised as counter rotating.   I'm sure the companies that use those blades just order a large number of blades.