Mr Jaws Posted March 19, 2023 Report Share Posted March 19, 2023 Hello All I'm trying to place an order but have no clue what size clip and size I should purchase for this blade. Thank you in advance. 1 Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted March 21, 2023 Report Share Posted March 21, 2023 The drop shot clips are not the correct ones to use. Bass is giving the correct information. Quote Link to comment Share on other sites More sharing options...
Mr Jaws Posted March 22, 2023 Author Report Share Posted March 22, 2023 Right on. Thanks for the replies Quote Link to comment Share on other sites More sharing options...
JD_mudbug Posted March 22, 2023 Report Share Posted March 22, 2023 Those drop shot clips look too tightly wrapped to get on a jig blade. If I am not using a snap, I use Mustad Fastach Clips size 2 (3/4" long). They have enough room to get on the blade. I will bump the clip up to a size 3 on 3/4 oz and 1 oz bladed jigs. I recommend using painters tape down the sides of both faces of the blade until to you get used to putting them on. The tape will prevent scratching the finish on the blade. I use needle nose pliers to put them on. It doesn't take long to get the hang of it. Quote Link to comment Share on other sites More sharing options...
Mr Jaws Posted March 23, 2023 Author Report Share Posted March 23, 2023 Thanks all for the input. Quote Link to comment Share on other sites More sharing options...
