Jay W Posted April 23, 2023 Report Share Posted April 23, 2023 Hello, I just purchased my first mold’s from Epic and I would like to duplicate “Berkeley magnum floating power bait eggs” Any advice on plastisol: Brand floating vs adding a floating additive finesse vs medium vs soft etc colorant - dyes vs resins vs mica I figure there will be a lot of trial and error but was hoping maybe someone has already figured out a technique that may save me time and money. Thanks in advance for any help. Quote Link to comment Share on other sites More sharing options...
alsworms Posted April 23, 2023 Report Share Posted April 23, 2023 Welcome to TU! There have been members in the past here who have duplicated the eggs and hopefully someone can chime in and help out. Good luck! Quote Link to comment Share on other sites More sharing options...
Jay W Posted April 23, 2023 Author Report Share Posted April 23, 2023 Thanks for the reply. I will continue to look through the other post as well. Quote Link to comment Share on other sites More sharing options...
toadfrog Posted April 25, 2023 Report Share Posted April 25, 2023 I always used Bait Plastics medium. Didn't care much for floating additives so I just got the floating plastic. I've used everything from mica powders to dyes . Didn't matter that much to me but I made sure it didn't bleed . Check that bleeding potential before you buy colorant. Real disappointment when you have a bag of baits come out like a cheap flannel shirt. 2 Quote Link to comment Share on other sites More sharing options...
Jay W Posted April 25, 2023 Author Report Share Posted April 25, 2023 Thanks for the advice. I ended up ordering dead on plastix floating, finesse formula. I also ordered some of their dyes. Anxious to try it out. Quote Link to comment Share on other sites More sharing options...
