Flaswimbaiter Posted December 21, 2023 Report Share Posted December 21, 2023 Instead of redesigning a new bait, I took an older bait, and tried to make it into a lipless, but for some reason I had to put the line tie way up on the top of the bait, much farther than it should be to get the desired action. I placed all of my weight into the nose of the bait because that’s where I thought it should be. Where do you place your lead on a lip? Is it the nose or is the belly or do you distribute it evenly? Quote Link to comment Share on other sites More sharing options...
Big Epp Posted December 22, 2023 Report Share Posted December 22, 2023 I found this picture that might be helpful. 1 Quote Link to comment Share on other sites More sharing options...
Big Epp Posted December 22, 2023 Report Share Posted December 22, 2023 Some of the lipless cranks I've made using barrel weights I'll put 1 weight on the center of balance and another about half way to the nose. 1 Quote Link to comment Share on other sites More sharing options...
Flaswimbaiter Posted December 22, 2023 Author Report Share Posted December 22, 2023 4 hours ago, Big Epp said: Some of the lipless cranks I've made using barrel weights I'll put 1 weight on the center of balance and another about half way to the nose. Thanks Big,I put too much too far forward. Will know for next time 1 Quote Link to comment Share on other sites More sharing options...
