Youngj Posted April 16, 2024 Report Share Posted April 16, 2024 Would brushing alumi uv on spoons work, i have used kbs but as for now the smell of kbs is very strong for me so i want to opt out of it and looking for alternatives that would work on spoons with less odor Quote Link to comment Share on other sites More sharing options...
mark poulson Posted April 16, 2024 Report Share Posted April 16, 2024 From my experience with Solarez UV resin, I think any UV resin would add weight that would affect the side to side fall of a casting spoon. 1 Quote Link to comment Share on other sites More sharing options...
Youngj Posted April 16, 2024 Author Report Share Posted April 16, 2024 23 minutes ago, mark poulson said: From my experience with Solarez UV resin, I think any UV resin would add weight that would affect the side to side fall of a casting spoon. Do you know any clearcoat that does not have a extreme smell? Quote Link to comment Share on other sites More sharing options...
Fishermanbt Posted April 16, 2024 Report Share Posted April 16, 2024 I use CS Coatings Seal-Coat on my jigging spoons. Very little to no smell. Two to three coats depending if I do an initial coat with glitter in it. Dip and drip. Being water based it can also be thinned and applied through an airbrush. After a few days of cure time it seems rock solid. 1 Quote Link to comment Share on other sites More sharing options...
Youngj Posted April 16, 2024 Author Report Share Posted April 16, 2024 1 hour ago, Fishermanbt said: I use CS Coatings Seal-Coat on my jigging spoons. Very little to no smell. Two to three coats depending if I do an initial coat with glitter in it. Dip and drip. Being water based it can also be thinned and applied through an airbrush. After a few days of cure time it seems rock solid. Im guessing it does not chip easily with 2-3 dips? Is it uv activated? Quote Link to comment Share on other sites More sharing options...
