Daiwaman23 Posted February 13, 2005 Report Share Posted February 13, 2005 As in to make a 2 part mold used say resin for the base let it cure then flip it and coath the heck out of it and use plaster on the top half to create a 2 part mold? What effect would this have? and am i jsut rambling on about something useless because im tired lol Anyway just a thought Secondly what about a 2 part resin mold with aluminum foil coated in vaseline to create the release agent? You would just have to cut the shape of the worm out in aluminum foil. I saw someone emntion of trying saran wrap but no message of if it worked or not. How can you make a successful 2 part resin mold? Any info wouild be appreciated! From the ramblings of a newbie Quote Link to comment Share on other sites More sharing options...
GB GONE Posted February 14, 2005 Report Share Posted February 14, 2005 Diawaman: Check the picture postings in the Soft Plastic area...the 3" stick baits are made with a 2 part resin mold. You may want to PM Travis to get more info on how he made that mold!! I think you would want to keep the 2 pieces of the mold from the same material as plaster has some shrinkage and resin really doesn't. I think you would have a problem lining up your parts and maybe some flash to trim. Jim Quote Link to comment Share on other sites More sharing options...
