Gator_Fan Posted February 14, 2005 Report Share Posted February 14, 2005 What type of heat should I use with a drying wheel : I was thinking of using either red heat bulbs or one of those ceramic heaters with the little fan on it. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Coley Posted February 14, 2005 Report Share Posted February 14, 2005 First of all, if you clearcoat in a warm area like 72 degrees, you don't need any additional heat. If I did need heat, I wouldn't use any thing with a fan, this is apt to blow dust on your finish. I would use something like a small hot plate. even a 60 watt light bulb will keep your area warm if it is contained. Coley Quote Link to comment Share on other sites More sharing options...
