basscatcher89 Posted July 19, 2024 Report Share Posted July 19, 2024 Hey folks Was just curious on something. Working on a diving bait that has the line tie coming out a good distance from the bait to where it goes through the bottom of the lip. Because of the distance when tuning the bait it seems like the line tie has to much freedom to move around as I'm reeling it in. I was thinking about putting a beat of epoxy on the bottom side of the lip to hold everything steady and make sure the bait can hold a tune on a retrieve. The hole around the line tie has little to no play but I figure I can hold it tight with some epoxy and it should run. Anybody else run up against this? Quote Link to comment Share on other sites More sharing options...
basscatcher89 Posted July 19, 2024 Author Report Share Posted July 19, 2024 Think I got it figured out. Did a dab of devcon 2 ton right on the bottom side of the lip were the line tie passes through and it seems much more solid now. We will see how it holds up. 1 Quote Link to comment Share on other sites More sharing options...
Big Epp Posted July 21, 2024 Report Share Posted July 21, 2024 I haven't made any baits yet with a line tie in the lip like you are describing, but I love your solution. Makes sense to me! Quote Link to comment Share on other sites More sharing options...
