RedRum Posted August 7, 2024 Report Share Posted August 7, 2024 I’m thinking about cutting open the top of 55 barrel and welding in parts of bayou classic and running the fuel line and burner in from a hole in side of barrel. Anyone have such experience? Quote Link to comment Share on other sites More sharing options...
dlaery Posted August 7, 2024 Report Share Posted August 7, 2024 sounds awlful big. what are you using for the lead pot? i built a smaller one using a burner and a custom made pot and outer housing. Quote Link to comment Share on other sites More sharing options...
RedRum Posted August 7, 2024 Author Report Share Posted August 7, 2024 2 hours ago, dlaery said: sounds awlful big. what are you using for the lead pot? i built a smaller one using a burner and a custom made pot and outer housing. Dutch oven iron pot I believe is what it is. I could use 1/2 the barrel but the stand up height of the full barrel is pretty attractive Quote Link to comment Share on other sites More sharing options...
dlaery Posted August 7, 2024 Report Share Posted August 7, 2024 this is where i bought my burner https://tejassmokers.com/ Quote Link to comment Share on other sites More sharing options...
RedRum Posted November 1, 2024 Author Report Share Posted November 1, 2024 On 10/29/2024 at 4:26 PM, piercyy said: I also can't find the one i need I think I want to convert an entire barrel to a smelting station, that way I can stand and pour. Probably open up the top so that I can set my burner top into the hole and run a propane line into it. The edges will double as a surface area for molds as well. Quote Link to comment Share on other sites More sharing options...
