RedRum Posted August 7 Report Share Posted August 7 I’m thinking about cutting open the top of 55 barrel and welding in parts of bayou classic and running the fuel line and burner in from a hole in side of barrel. Anyone have such experience? Quote Link to comment Share on other sites More sharing options...
dlaery Posted August 7 Report Share Posted August 7 sounds awlful big. what are you using for the lead pot? i built a smaller one using a burner and a custom made pot and outer housing. Quote Link to comment Share on other sites More sharing options...
RedRum Posted August 7 Author Report Share Posted August 7 2 hours ago, dlaery said: sounds awlful big. what are you using for the lead pot? i built a smaller one using a burner and a custom made pot and outer housing. Dutch oven iron pot I believe is what it is. I could use 1/2 the barrel but the stand up height of the full barrel is pretty attractive Quote Link to comment Share on other sites More sharing options...
dlaery Posted August 7 Report Share Posted August 7 this is where i bought my burner https://tejassmokers.com/ Quote Link to comment Share on other sites More sharing options...
RedRum Posted November 1 Author Report Share Posted November 1 On 10/29/2024 at 4:26 PM, piercyy said: I also can't find the one i need I think I want to convert an entire barrel to a smelting station, that way I can stand and pour. Probably open up the top so that I can set my burner top into the hole and run a propane line into it. The edges will double as a surface area for molds as well. Quote Link to comment Share on other sites More sharing options...
