Muskysmoker529 Posted December 13, 2024 Report Share Posted December 13, 2024 Hey folks long time lurker first time poster. Been building/painting baits for a long time and have always used Diamond clear spray/ resin and recently went through the process of building a UV cure box to get away from the 3 month out gas times. Welp right now I’m running a rottesery in a box with a 100w uv led 395nms. Brushed the uv clear on pretty thick and allowed to spin for a minute before flicking on UVs. Ended up getting a bunch of pimples in the clear and literal bubbles. I didn’t use any sort of cleaner or chemical on them, and I used Createx paints. Any tips or tricks for the uv finish would be really appreciated. Also don’t go to hard on the paint job she was a quicky lol Quote Link to comment Share on other sites More sharing options...
21xdc Posted December 13, 2024 Report Share Posted December 13, 2024 Also known as fish eyes... Quote Link to comment Share on other sites More sharing options...
Cprice Posted January 13 Report Share Posted January 13 Did you ever figure this issue out? I’m having the same problem,.. Quote Link to comment Share on other sites More sharing options...
