badfish03 Posted February 22, 2005 Report Share Posted February 22, 2005 Okay the mold I made that had cement grout added is a bit rough and I need to smooth it out, so I need to re-coat it. I over thinned the Devcon when I coated it and it soaked it up leaving a rough finish. Problem is I have poured with it a couple times and it has oil on it. W#hats best way to clean it before putting another thicker coat of Devcon? I have MEK if needed but would perfer to do it another way. Robert Quote Link to comment Share on other sites More sharing options...
overkill Posted February 23, 2005 Report Share Posted February 23, 2005 Use a product called Krudkutter available at home depot. the stuff is awesome!! It will remove any oil and leave no residue. I bought a gallon to use at home for cleaning everything! Quote Link to comment Share on other sites More sharing options...
