mike_in_indiana Posted July 18, 2003 Report Share Posted July 18, 2003 What do you guys recommend for a brush cleaner when using Devcon 2 ton epoxy as an overcoat? Quote Link to comment Share on other sites More sharing options...
Mylures Posted July 18, 2003 Report Share Posted July 18, 2003 Hi Mike, I personally use acetone and really like it. I know some guys use MEK and I think some use denatured alcohol. What ever you use make sure to follow the directions on the label as any of this stuff can be very hazardous and flammable. Hope this helps and good luck. Ken Schmitz Mylures Quote Link to comment Share on other sites More sharing options...
Coley Posted July 18, 2003 Report Share Posted July 18, 2003 I leave my brush sitting in an airtight plastic bottle with about an inch of acetone in the bottom. Its ready to go next time. Coley Quote Link to comment Share on other sites More sharing options...
RiverMan Posted July 19, 2003 Report Share Posted July 19, 2003 Since I sometimes thin the Devcon with rubbing alcohol I also use this for cleaning the brush after each use, works great! RM Quote Link to comment Share on other sites More sharing options...
