davycrockett Posted July 22, 2005 Report Share Posted July 22, 2005 I'm building some musky and pike spinnerbaits and am having a hard time finding skirt material long enough(6"-7"). Netcraft and Lure Components are the only ones I can find that carry the skip cut and neither has much of selection of colors. Slamina sells the musky skirt tabs but they are pretty pricey per bait. With the uncertainty of the availability of living rubber I really don't want to go down that road. I'm wanting to stick with several color patterns (Firetiger, Black or Black with gold flake, and a Shad pattern) Thanks. Quote Link to comment Share on other sites More sharing options...
Brad Posted July 24, 2005 Report Share Posted July 24, 2005 You can try here http://www.luremaking.com/catalogue/catalogue-index/catalogue-items/skirtmaking/9_inch_silicone_pad.htm if you use 3 pads, it works out to be about a $1.00 a skirt. Quote Link to comment Share on other sites More sharing options...
jigmaster Posted July 25, 2005 Report Share Posted July 25, 2005 Dennis Hatfield-----Hatfield Enterprises 616-677-5215 Denns is a decent guy to deal with. He will set you up. Regards JM www.daimonlures.com Quote Link to comment Share on other sites More sharing options...
davycrockett Posted July 26, 2005 Author Report Share Posted July 26, 2005 Thanks fellas. I'm going to order the musky skirts from Stamina. I can buy the pre-made skirts 20 for $17.91. They have some good looking patterns and cheaper than what I can make a skirt for. I figure I'll tie the skirt over the rubber skirt band after it is on the bait. Thanks again! Quote Link to comment Share on other sites More sharing options...
WidowMaker Posted August 23, 2005 Report Share Posted August 23, 2005 Skirts Plus 7675 West Highway 13 PO. Box 95 Savage MN. 55378 Phone: (612) 894- 1840 Quote Link to comment Share on other sites More sharing options...
