svepop Posted August 17, 2005 Report Share Posted August 17, 2005 Anyone know where I could get some or who makes anodized spinnerbait and buzzbait blades...ie. chart, black and blue. Quote Link to comment Share on other sites More sharing options...
cadman Posted August 17, 2005 Report Share Posted August 17, 2005 First of all anodizing is a process only on aluminum, so all your blades have to be aluminum. I know for a fact that there is a wide spectrum of colors now available. Locally by me there is usually a lot charge, depends on the color. roughly $50 - $100. You need a lot of blades to re-coop this cost. Also just like any other material, some aluminums anodize better than others. Also the finish looks much nicer on good clean aluminum. Check your local yellow pages, this is a very common process. Quote Link to comment Share on other sites More sharing options...
svepop Posted August 17, 2005 Author Report Share Posted August 17, 2005 Cadman, Thanks for the info. I'll look around and see what I can find. Quote Link to comment Share on other sites More sharing options...
Mr B Posted August 17, 2005 Report Share Posted August 17, 2005 I have never tried it but you might try the Spike-it Blade dip. It looks like it gives the anodized look. Mr B Quote Link to comment Share on other sites More sharing options...
svepop Posted August 18, 2005 Author Report Share Posted August 18, 2005 Mr. B I have not tried the Spike-It Blade dip either. I was not sure how durable it was on the blades...but that is an option I'll look into as well. Thanks, Quote Link to comment Share on other sites More sharing options...
B&D Custom Lures Posted August 18, 2005 Report Share Posted August 18, 2005 Spike It , works well but I'd recommend bake the blade after dipping.It works good on hooks that way also Quote Link to comment Share on other sites More sharing options...
svepop Posted August 18, 2005 Author Report Share Posted August 18, 2005 Thanks guys, Looks like I'll be trying the Spike-It. Quote Link to comment Share on other sites More sharing options...
