bass100 Posted February 4, 2016 Report Share Posted February 4, 2016 It is www.bdiexpress.com Quote Link to comment Share on other sites More sharing options...
Chuck Young Posted May 19, 2016 Report Share Posted May 19, 2016 (edited) An easton 2215 arrow shaft with a target point.Plenty of broken arrows free at the archery shop. Lube it. load it with collars Mix your colors and push them in with a brush handle. Push the flat section where the fibers are joined. Just cut the shaft with a pipe cutter to 1/2 the length of the skirt. Readjust the fibers once on the jig. El Cheapo strikes again. Edited May 19, 2016 by Chuck Young Quote Link to comment Share on other sites More sharing options...
BBBill64 Posted August 21, 2016 Report Share Posted August 21, 2016 The o-ring alternative to collars looks like a good one, especially since I have seen a number of normal collars disintegrate on older baits. The 006 N70 o-ring has a 1/8" id. Is that small enough to hold 2 skirt pads securely? Quote Link to comment Share on other sites More sharing options...
