dragline Posted December 6, 2005 Report Share Posted December 6, 2005 Anyone please Is it possible to dip baits in "automotive urethane" for a final clear coat or is it strictly a spray on application. Secondly what are some good brand names. Quote Link to comment Share on other sites More sharing options...
Skeeter Posted December 6, 2005 Report Share Posted December 6, 2005 Automotive Urethane Clears require an activator so that they will harden. So if you mix up enough to just dip a few baits then you will be wasting alot of clear. It is best to spray it. I would start with either DuPont or PP&G clears to start with. They are readily available. Skeeter Quote Link to comment Share on other sites More sharing options...
KcDano Posted December 8, 2005 Report Share Posted December 8, 2005 As skeeter mentioned dupont and ppg are good. However, there are brands that are relatively inexpensive in comparison and will perform as good when clearcoating baits. Before you spend condsiderable coin on Dupont, sikkens, ppg or any other of the big buck brands. Give "Autobody Master" brand sold at many auto part stores. You will save yourself some $$$$$ and if urethane proves to be something you want to use with regularity, then try a few of the others. Quote Link to comment Share on other sites More sharing options...
