dsmblack Posted January 14, 2006 Report Share Posted January 14, 2006 I am having trouble pouring beavers( or any other bait actually) in a three color pour. I melt in the microwave and pour from a pyrex cup. Any suggestions. Quote Link to comment Share on other sites More sharing options...
Travis Posted January 14, 2006 Report Share Posted January 14, 2006 Preheat molds, heat plastic as hot as you can without going too far, and that should help out most problems. Also the more you do it the quicker you will get and that helps out a lot. Quote Link to comment Share on other sites More sharing options...
The Dutchman Posted January 14, 2006 Report Share Posted January 14, 2006 A small electric hot plate and Lurecraft pouring pans will help. I believe they sell the hot plate device also. However, Wal-Mart has them and also pouring pans. Heat your plastic in microwave and pour into pans and keep them on the electric plate. Stir as needed. The plastic will stay hot enough to pour three or four pour baits. Good Luck. Joe Quote Link to comment Share on other sites More sharing options...
Delw Posted January 14, 2006 Report Share Posted January 14, 2006 another way is to pour your baits then plac them in the over on a rack at 300-350 degrees, this will alow the colors to flow nicely and evenly. you can use a griddle also Quote Link to comment Share on other sites More sharing options...
dsmblack Posted January 15, 2006 Author Report Share Posted January 15, 2006 Hey Del, how long would I leave them in the oven? Quote Link to comment Share on other sites More sharing options...
Delw Posted January 15, 2006 Report Share Posted January 15, 2006 I dont know, I havent done it like that too much. It does make a pretty bait though, no seems colors blend well etc. Delw Quote Link to comment Share on other sites More sharing options...
