earthworm77 Posted February 8, 2006 Report Share Posted February 8, 2006 This may be a simple question to answer but what is the true mix ratio for a lurecraft silicone mold kit. It says 9 parts mold material to 1 part reaction agent. But there is 14oz of mold material and 1 ounce of reaction agent in the kit. Doesn't that mean I should have 5 parts mold material left over? I've made a ton of resin and water putty molds but never poured my own silicone. Any advice? Quote Link to comment Share on other sites More sharing options...
TAE73 Posted February 8, 2006 Report Share Posted February 8, 2006 I had leftover also, doesnt make much since. Quote Link to comment Share on other sites More sharing options...
COBRA Posted February 8, 2006 Report Share Posted February 8, 2006 I ALWAYS SQUIRT A TON OF THE BLUE HARDENER INTO THE WHITE AND MIX UNTIL A GOOD SOLID SKY BLUE, IF IT LOOKS WHITE AT ALL IT TAKES FOREVER TO SET UP. I ALSO NEVER HAD A PROBLEM WITH WORK TIME WITH A LOT OF HARDENER. LURE CRAFT IS WICKED EXPENSIVE, I HAVE APLACE I GET THE SAME STUFF A LOT CHEAPER. Quote Link to comment Share on other sites More sharing options...
TAE73 Posted February 9, 2006 Report Share Posted February 9, 2006 Do you want to pass on where you are finding it cheaper??? Thanks. Quote Link to comment Share on other sites More sharing options...
acklac7 Posted February 9, 2006 Report Share Posted February 9, 2006 I also am in desperate need of cheap(er) RTV!!! please pass on the info!!! Quote Link to comment Share on other sites More sharing options...
Mattlures Posted February 9, 2006 Report Share Posted February 9, 2006 I buy all my silicone at smooth-on. It is way cheaper and they have a lot of diferent kinds for diferent aplications. THEY EVEN HAVE 1-1 RATIOS Quote Link to comment Share on other sites More sharing options...
TAE73 Posted February 9, 2006 Report Share Posted February 9, 2006 Which formula are you using of smooth-on???? Quote Link to comment Share on other sites More sharing options...
