bojon Posted February 26, 2006 Report Share Posted February 26, 2006 What cement or what ever could laminate Lexan? Quote Link to comment Share on other sites More sharing options...
Brett Posted February 27, 2006 Report Share Posted February 27, 2006 Not really sure but only tip I can give you is you will need to rough up the surface. Quote Link to comment Share on other sites More sharing options...
TBait Posted February 27, 2006 Report Share Posted February 27, 2006 Is there a reason for laminating other than acheiving a thicker piece? Just buy it thicker to start with? Not sure what you are trying to do? Quote Link to comment Share on other sites More sharing options...
bojon Posted February 27, 2006 Author Report Share Posted February 27, 2006 Sorry I was not very plain.I have a balsa crankbait that I caved and I want it to go deeper.I don't want to remove the existing lip because I really see a mess trying to get it out.I thought I might be able to make a larger lip and fit it to the original.Also ,maybe one could make a 2 pc lip with a slot on the under one,to allow for the forward lead,and wire line tie. Quote Link to comment Share on other sites More sharing options...
TBait Posted February 27, 2006 Report Share Posted February 27, 2006 I dont know what you could do that would give you the strength you are needing. Lexan is made to flex....any flexing that would occur would probably break the adhesive. Lexan can be formed into shapes with a consistent temp of around 300 degrees. See Lapala...he may have more ideas and more experience with this.... Mike Quote Link to comment Share on other sites More sharing options...
mossy maker Posted February 27, 2006 Report Share Posted February 27, 2006 I have removed lips before using a small cut off wheel on my Dremel. If you be careful and take you time it works well. I did it once and didn't even have to repaint. mossy maker Quote Link to comment Share on other sites More sharing options...
bojon Posted February 27, 2006 Author Report Share Posted February 27, 2006 Thanks for the tips guys.I will keep you posted how I make out. Quote Link to comment Share on other sites More sharing options...
Muskiefool Posted March 1, 2006 Report Share Posted March 1, 2006 Here is a lil something Ive been playing with 2 ton devcon Silver foil and Glitter mixed with createx paint transparent Sorry pic wont work you can cut and paste it Quote Link to comment Share on other sites More sharing options...
